Universal cargo platform without tipping mechanism — for pallet goods, construction materials, wood, machinery. Variants 2N, 3N, 4N.
The page will adapt — showing specifications, photos and technical data sheets for the selected variant.
Version shown: 4 axles · photo surroundings edited with AI.
Cargo platform with 27 mm anti-slip plywood or HB450 steel floor. Aluminium dropsides and tailgate. Hot-dip galvanised protection.
A flatbed is a universal cargo platform without a tipping mechanism — designed for transporting palletised goods, building materials, timber, machinery and other loads that need a stable, flat load bed. Floor made of 27 mm anti-slip plywood or HB450 steel.
Dropsides and tailgate made of 25 mm anodised aluminium profile with PALETA opening — suitable for side loading by forklift. The entire structure is blasted with steel grit and then hot-dip galvanised for maximum corrosion resistance and long service life.
| Platform length | 4 000 - 7 500 mm |
| Platform width | 2 480 mm |
| Sidewall height | 400 - 800 mm |
| Payload | Depends on chassis |
| Floor | Anti-slip plywood 27 mm · HB450 5 mm |
| Sidewalls | AL profile anodized 25 mm |
| Front bulkhead | STEEL ST 52.3 4 mm · Strenx S700 MC 4 mm · AL profile anodised 25 mm |
| Tailgate | AL profile anodized 25 mm |
| Subframe | Individually designed according to the chassis manufacturer's guidelines |
| Surface treatment | Blasted with steel granules, then hot-dip galvanized |
| Body type | Flat cargo platform (non-tipping) |
| Right sidewall | PALETA · Without sidewalls |
| Left sidewall | PALETA · Without sidewalls |
| Tailgate | PALETA |
| Tarpaulin system | None · towards the front bulkhead |
| Aluminium side underrun guards |
| Position light wiring |
| Wheel chock holders |
| Full plastic rear mudguards + plastic mud flaps |
| Lashing eyes in the floor on both sides (every 1 m) |
| Shovel holder |
| Rear light cluster guards |
| Reflective marking of the flatbed |
| Documents for vehicle registration |
| Manual in Slovak |
Suitable for pallet goods, machines, wood, building materials and oversized loads requiring a stable platform.
Dropsides and tailgate made of anodised aluminium profile — lower tare weight and higher payload.
The entire construction is blasted with steel granules and then hot-dip galvanized — maximum resistance to corrosion and long service life.
Optional fitting of four twist locks for shipping containers — one platform for both pallet and container transport.
Anti-slip plywood 27 mm for pallet goods, or HB450 5 mm steel floor for demanding loads and machines.
Complete post-warranty service, availability of original spare parts and technical advice throughout the service life.
We mount the flatbed on all common truck brands








Technical data sheet for the selected chassis; general manuals and service booklet.
Installations of flatbed bodies on different chassis and axle configurations
Flatbed · 2 axles
Flatbed · 2 axles (Volvo 4x2)
Flatbed · 3 axles
Flatbed · 3 axles
Flatbed · 3 axles
Flatbed · 4 axles (drone)
Flatbed · 4 axles
Flatbed · 4 axlesOptional features available for all variants (2N, 3N, 4N)
Aluminium side underrun guards
Storage boxes for crane outrigger pads
Hooks on the front bulkhead
ISO container mountings (Twist-Lock)
ISO mountings — detail
Stainless steel toolbox
Perforated perimeter profile
Perimeter profile — detail
Rear folding bumper
Tarpaulin retracting towards the front bulkhead
Recessed floor lashing rings
Recessed lashing rings — detail
Flashing warning beaconSelect the axle count, floor and end-wall materials, sidewalls and accessories. Then submit your enquiry — we will prepare an individual quotation.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
Photos of the chassis, the vehicle registration certificate or a drawing will help us prepare a more accurate quote. Photos and PDF — max. 10 files, each up to 5 MB.
Contact us for a no-obligation quote and technical advice