+421 947 222 222 vsmont@vsmont.sk Mon–Fri: 7:00–16:00
VSN hydraulic swap body system
VSN

Hydraulic swap body system

The VSN hydraulic swap-body system allows one chassis to carry different bodies: tipper, flatbed, container, concrete mixer, loader crane, tank, spreader or water sprayer. The specification is adapted to the particular combination of chassis and bodies.

Variant

Select the number of chassis axles

Only the maximum gross chassis weight differs. The system and accessories are the same.

VSN

Hydraulic swap body system

The VSN hydraulic swap-body system allows one chassis to carry different bodies: tipper, flatbed, container, concrete mixer, loader crane, tank, spreader or water sprayer. The specification is adapted to the particular combination of chassis and bodies.

Exchange in 5–10 min
Chassis up to 26 t
Single-person operation

Product description

The VSN hydraulic swap-body system allows one chassis to carry different bodies: tipper, flatbed, container, concrete mixer, loader crane, tank, spreader or water sprayer. The specification is adapted to the particular combination of chassis and bodies.

Bodies are connected using quick couplings (hydraulic and pneumatic systems + electrical connections). The carrier increases the installation height by only +6 to 9 mm on the chassis frame. Bodies can be exchanged with a load up to a total weight of 11 tonnes. Complete HYVA hydraulics.

Technical parameters

Chassis load capacity

Maximum gross weight up to 18 t (VSN2H) up to 26 t (VSN3H) up to 41 t (VSN4H)
Configuration 4×2 / 4×4 6×4 / 6×6 8×4 / 8×6 / 8×8
Product code VSN2H VSN3H VSN4H
Load during exchangeup to 11 tonnes

Hydraulics

HydraulicsComplete HYVA for the swap system and swap body drive (Z29.01)
Lifting mechanismHydraulic cylinders — horizontal + vertical movement
Body connectionsQuick couplings: hydraulic + pneumatic systems + electrical connections
LiftingHydraulically raised and lowered bodies

Engineering

Body exchange timeapprox. 5–10 minutes
Operation1 person
Increase in installation height+6 to 9 mm on the chassis frame
Paint finishBefore painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Colour shadePainted to match the chassis frame (Z11.01)

Compatible bodies

Container bodyIncluding VS-MONT custom bodies
TipperS1G / S1H / S2 / S3
Flatbed bodyVarious configurations
Hook liftYES
Tank / spreader / water sprayerBy agreement
Loader craneDepending on specification
Concrete mixersDepending on specification

Standard equipment

Plastic tool box (Z19.01)
Rear aluminium mudguards over two axles, mounted on the chassis frame (Z10.02)
Mudflaps (Z10.04)
Aluminium side underrun guards (if not part of the chassis) (Z13.01)
Position light wiring (Z17.04)
Wheel chock holders (Z25.01)
Shovel holder (Z25.02)
Rear light cluster guards (Z13.02)
Installation of the swap body system on the chassis at the VS-MONT plant (Z27.01)
Documents for vehicle registration (Z26.01)
Manual in Slovak (Z26.02)

Advantages of the VSN model

Quick body exchange

The VSN hydraulic swap-body system allows one chassis to carry different bodies: tipper, flatbed, container, concrete mixer, loader crane, tank, spreader or water sprayer. The specification is adapted to the particular combination of chassis and bodies.

Minimal mounting height

The carrier is designed so that the mounting height increases by only +6 to 9 mm on the chassis frame — with no negative impact on other equipment.

Maximum use of the vehicle

One chassis for multiple tasks — faster return on investment thanks to better vehicle utilisation throughout the working year.

HYVA hydraulics

Complete HYVA hydraulics for the swap system and for powering the swap bodies. Proven technology with a long service life.

Quick couplings

Bodies are connected via quick couplings — hydraulic + air system + electrical installation. No special tools needed.

Body exchange with loads up to 11 t

Bodies can be exchanged with a load of up to 11 tonnes total weight — also suitable for fully loaded containers.

Compatible chassis

We install the VSN system on all common truck brands

Quotation and documents

Complete VSN quotation in PDF format + technical documentation. Use the form below for your specific dimensions and specifications.

Design examples

VSN installations on various chassis — with containers, tipper bodies, truck mixers and more

VSN · concrete mixer changeoverVSN · concrete mixer changeover
VSN · 4-axle vehicleVSN · 4-axle vehicle
VSN · 4-axle vehicleVSN · 4-axle vehicle
VSN · 4-axle vehicleVSN · 4-axle vehicle
VSN detailVSN · system detail
VSN installationVSN
VSN installationVSN
VSN installationVSN
Enquiry

No-obligation enquiry

Fill in the basic details and we will prepare a quotation for you. We'll get back to you within 24 hours.

Customer required

Chassis

Notes / specification

Attachments optional

Photos of the chassis, the vehicle registration certificate or a drawing will help us prepare a more accurate quote. Photos and PDF — max. 10 files, each up to 5 MB.

Are you interested in the VSN system?

Contact us for a no-obligation quote and technical advice

VSN Hydraulic swap body system
Write to us +421 918 902 999 NFC Vehicle NFC