Tipping to all three sides — right, left and rear. Universal model for construction, agriculture and municipal use. Variants 2N, 3N, 4N.
The page will adapt — showing specifications, photos and technical data sheets for the selected variant.
Version shown: 4 axles · photo surroundings edited with AI.
A tipper body for construction, municipal work and bulk transport. Tipping to either side or to the rear helps adapt unloading to the available space.
The S3 is a three-way tipper for everyday transport and unloading. Its subframe is designed for the specific chassis. Sidewall and tailgate opening mechanisms are selected to suit operating requirements.
Suitable for construction, municipal applications and the transport of bulk materials, timber or agricultural products. Volume, body specification and accessories are adapted to the material carried.
| Body volume | 6 - 22 m³ |
| Internal length | 3 500 - 6 000 mm |
| Internal width | 2 370 – 2 420 mm |
| Sidewall height | 500 - 1 200 mm |
| Floor material | HB450, Strenx S700 MC HB450, HB500 TÜF, Strenx S700 MC |
| Floor thickness | 4 - 6 mm 4 - 6 mm 5 - 8 mm |
| Sidewall material | STEEL ST 52.3, HB450, HB500 TÜF, Strenx S700 MC |
| Tipping direction | Three-way (right / left / rear) |
| Cylinder type | HYVA — complete hydraulics with controls in the cab |
| Subframe | Individually designed according to the chassis manufacturer's guidelines |
| Tipping angle | 45° - 50° |
| Right sidewall | PENDEL/PALETA · PENDEL · hydraulic · fixed |
| Left sidewall | PENDEL/PALETA · PENDEL · hydraulic |
| Tailgate | PENDEL · PENDEL/PALETA (H11 locks) PENDEL · PENDEL/PALETA · hydraulic double-acting |
| Tarpaulin system | None · to the side by crank · towards the front bulkhead None · to the side by crank · towards the front bulkhead · CRAMARO GALOPINO electric |
| Spare wheel on the front bulkhead (mechanical/retractable) |
| Plastic tool box |
| Rear mudguardsfull plasticaluminium, mounted on the subframe+ mudflaps |
| Aluminium side underrun guards |
| Position light wiring |
| Wheel chock holders + shovel holder |
| Tipping limit switch + safety rope |
| Rubber stops — replaceable + rear light protection |
| Dual-circuit trailer connection |
| Reflective marking of the body according to ECE R104 |
| Body prop + tipping warning signal |
| Rear discharge lip — fixed, flush with the floor (for asphalt pavers) |
| Mounting of the body at the VS-MONT plant + vehicle registration documents |
Right, left and rear unloading — flexibility for different working conditions and support for different types of unloading.
Body made of HB450, HB500 TÜF and Strenx S700 MC ensures maximum wear resistance and long life.
PENDEL/PALETA opening option, hydraulic sidewalls, double-acting hydraulic tailgate and other variants as needed.
Construction, agriculture (S3 Agro variant), municipal work, transport of bulk materials, gravel, timber, biomass.
Hydraulic swivel bumper, paver version, dual-circuit trailer connection, chain locking, lashing eyes and more.
Complete post-warranty service, availability of original spare parts and technical advice throughout the service life.
We install the S3 body on all common truck brands







Installations of the S3 model on different chassis and axle configurations
S3 · 2 axles
S3 · 2 axles
S3 · 3 axles (drone)
S3 · 3 axles
S3 · 3 axles
S3 · 4 axles (drone)
S3 · 4 axles
S3 · 4 axlesOptional features available for all variants (2N, 3N, 4N)
Hydraulic sidewall
Discharge lip lock
Side underrun guards
Wheel chock holder
Shovel holder
Two-tone paint finish
CRAMARO electric tarpaulin
Rubber stops
Metallization of the body
Tool box
Body support
Aluminium rear mudguards
Folding bumper (ECE R58-03)
Side tarpaulin systemChoose the number of axles, materials, sidewalls, tailgate and accessories. Once completed, send your enquiry — we will prepare an individual quotation for you.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
Photos of the chassis, the vehicle registration certificate or a drawing will help us prepare a more accurate quote. Photos and PDF — max. 10 files, each up to 5 MB.
Contact us for a no-obligation quote and technical advice