Insulated three-way tipper body for asphalt transport. Thermal insulation reduces cooling of the load in transit. Versions for 3- and 4-axle chassis.
The page will adapt — showing specifications, photos and technical data sheets for the selected variant.
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.
Photo background edited with AI
Insulated three-way tipper body for asphalt transport. Thermal insulation reduces cooling of the load in transit. Versions for 3- and 4-axle chassis.
The S3T insulated body is designed for road construction and asphalt transport from the mixing plant to the paving site. Its insulated body helps retain load temperature in transit.
The body is adapted to the chassis make and intended use. Sidewall operation, sheeting and accessories are selected for the application. Technical specifications and equipment options are listed below.
| Body volume | 6 - 22 m³ |
| Internal length | 3 500 - 6 000 mm |
| Internal width | 2 200 - 2 400 mm |
| Sidewall height | 500 - 1 200 mm |
| Floor material | Strenx S700 MC, HB450 |
| Floor thickness | 4 - 6 mm 5 - 6 mm |
| Sidewall material | Strenx S700 MC 4 mm, HB450 4-6 mm |
| Thermal insulation | Stainless steel lining of the floor, sidewalls, front bulkhead and tailgate (standard) |
| Tipping direction | Three-way (right / left / rear) |
| Cylinder type | HYVA — complete hydraulics with controls in the cab |
| Subframe | Individually designed according to the chassis manufacturer's guidelines |
| Tipping angle | 45° - 50° |
| Right sidewall | PENDEL/PALETA · PENDEL · hydraulic · fixed |
| Left sidewall | PENDEL · hydraulic |
| Tailgate | PENDEL (suspended on pins) |
| Tarpaulin system | None · to the side by crank · towards the front bulkhead – CRAMARO GALOPINO electric |
| Thermal insulation of the body (stainless steel lining of all walls) — standard |
| Spare wheel on the front bulkhead (mechanical/retractable) |
| Plastic tool box |
| Aluminium rear mudguards mounted on the subframe + mud flaps |
| Aluminium side underrun guards |
| Position light wiring |
| Wheel chock holders + shovel holder |
| Tipping limit switch + safety rope |
| Rubber stops — replaceable + rear light protection |
| Dual-circuit trailer connection |
| Reflective marking of the body according to ECE R104 |
| Body prop + tipping warning signal |
| Rear discharge lip — fixed, flush with the floor (for asphalt pavers) |
| Mounting of the body at the VS-MONT plant + vehicle registration documents |
Insulation of the floor, sidewalls and end walls reduces heat loss from the load.
Optimized design for transporting asphalt mixtures and operating the paver. Optional folding bumper and locking of the discharge lip.
PENDEL or hydraulically operated sidewalls and three-way tipping to suit operating requirements.
Versions for 3- and 4-axle chassis. Each subframe is designed to the chassis manufacturer’s guidelines.
Hydraulic swivel bumper, paver version, dual-circuit trailer connection, chain locking, lashing eyes and more.
Complete post-warranty service, availability of original spare parts and technical advice throughout the service life.
The S3T body can be adapted to chassis of all makes.







Common documents for all variants.
S3T insulated body examples on a 4-axle chassis
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.
Illustrative S3T example · 4 axles. The specification is adapted to the selected chassis.Optional features available for 3N and 4N variants
Insulated sidewalls
Insulated front bulkhead
Insulated tailgate
Hydraulic sidewall
Discharge lip lock
Side underrun guards
Wheel chock holder
Shovel holder
Two-tone paint finish
CRAMARO electric tarpaulin
Rubber stops
Metallization of the body
Tool box
Body support
Aluminium rear mudguards
Folding bumper (ECE R58-03)
Side tarpaulin systemChoose the number of axles, materials, sidewalls, tailgate and accessories. Once completed, send your enquiry — we will prepare an individual quotation for you.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.
Click an option with a photo to see an example.
Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.
Click an option with a photo to see an example.
Click an option with a photo to see an example.
Photos of the chassis, the vehicle registration certificate or a drawing will help us prepare a more accurate quote. Photos and PDF — max. 10 files, each up to 5 MB.
Contact us for a no-obligation quote and technical advice