+421 947 222 222 vsmont@vsmont.sk Mon–Fri: 7:00–16:00
S2 two-way tipper
S2

Two-way tipper

Tipping to the right and left — a flexible model with opening sidewalls for construction and municipal use. Variants 2N, 3N, 4N.

Variant

Select the number of chassis axles

The page will adapt — showing specifications, photos and technical data sheets for the selected variant.

S2

Two-way tipper

A tipper body for construction, municipal work and bulk transport. Tipping to either side helps adapt unloading to the available space.

2-way tipping
HB450 / Strenx
Tailored

Product description

The S2 is a two-way tipper for everyday transport and unloading. Its subframe is designed for the specific chassis. Sidewall and tailgate opening mechanisms are selected to suit operating requirements.

Suitable for construction, municipal applications and the transport of bulk materials, timber or agricultural products. Volume, body specification and accessories are adapted to the material carried.

Technical parameters

Dimensions

Body volume6 - 22 m³
Internal length3 500 - 6 000 mm
Internal width2 200 - 2 400 mm
Sidewall height500 - 1 200 mm

Construction

Floor material HB450, Strenx S700 MC HB450, HB500 TÜF, Strenx S700 MC HB450, HB500 TÜF, Strenx S700 MC
Floor thickness 4 - 6 mm 4 - 6 mm 4 - 8 mm
Sidewall materialSTEEL ST 52.3, HB450, HB500 TÜF, Strenx S700 MC
Tipping directionTwo-way (right / left)

Hydraulics

Cylinder typeHYVA — complete hydraulics with controls in the cab
SubframeIndividually designed according to the chassis manufacturer's guidelines
Tipping angle45° - 50°

Sidewalls

Right sidewallPENDEL/PALETA · PENDEL · hydraulic · fixed
Left sidewallPENDEL/PALETA · PENDEL · hydraulic · fixed
Tailgate PENDEL · PENDEL/PALETA (H11 locks) PENDEL · PENDEL/PALETA · hydraulic double-acting
Tarpaulin system None · to the side by crank · towards the front bulkhead None · to the side by crank · towards the front bulkhead · CRAMARO GALOPINO electric

Standard equipment

Spare wheel on the front bulkhead (mechanical/retractable)
Plastic tool box
Rear mudguardsfull plasticaluminium, mounted on the subframe+ mudflaps
Aluminium side underrun guards
Position light wiring
Wheel chock holders + shovel holder
Tipping limit switch + safety rope
Rubber stops — replaceable + rear light protection
Dual-circuit trailer connection
Reflective marking of the body according to ECE R104
Body prop + tipping warning signal
Rear discharge lip — fixed, flush with the floor (for asphalt pavers)
Mounting of the body at the VS-MONT plant + vehicle registration documents

Advantages of the S2 model

Two-way tipping

Unloading to the right or left — suitable for roadside work and confined spaces.

High-strength materials

Body made of HB450, HB500 TÜF and Strenx S700 MC ensures maximum wear resistance and long life.

Custom configuration

PENDEL/PALETA opening option, hydraulic sidewalls and other variants as needed.

Universal use

Construction, municipal work, transport of bulk materials, gravel, timber, biomass.

Extensive optional equipment

Hydraulic swivel bumper, paver version, dual-circuit trailer connection, chain locking, lashing eyes and more.

Service and support

Complete post-warranty service, availability of original spare parts and technical advice throughout the service life.

Compatible chassis

We install the S2 body on all common truck brands

Downloads

Common documents for all variants.

A technical sheet for your S2 specification is available on request.

Design examples

Installations of the S2 model on different chassis and axle configurations

S2 2-axleS2 · 2 axles
S2 2-axleS2 · 2 axles
S2 2-axleS2 · 2 axles
S2 3-axle — droneS2 · 3 axles (drone)
S2 3-axle — droneS2 · 3 axles (drone)
S2 3-axle — droneS2 · 3 axles (drone)
S2 4-axle — droneS2 · 4 axles (drone)
S2 4-axleS2 · 4 axles
S2 4-axleS2 · 4 axles

Accessories & add-ons

Optional features available for all variants (2N, 3N, 4N)

Hydraulic sidewallHydraulic sidewall
Discharge lip lockDischarge lip lock
Side underrun guardsSide underrun guards
Wheel chock holderWheel chock holder
Shovel holderShovel holder
Two-tone paint finishTwo-tone paint finish
CRAMARO electricCRAMARO electric tarpaulin
Rubber stopsRubber stops
Metallization of the bodyMetallization of the body
Plastic tool boxTool box
Body supportBody support
Aluminium rear mudguardsAluminium rear mudguards
Rear folding bumperFolding bumper (ECE R58-03)
Side tarpaulin systemSide tarpaulin system
S2 configurator

Configure your tipper body

Choose the number of axles, materials, sidewalls, tailgate and accessories. Once completed, send your enquiry — we will prepare an individual quotation for you.

Category, type and chassis

Body category
Two-way
Body type
S2 — standard

Number of axles

Standard specification and standard equipment

m³Model range: 6 - 22 m³
Tipper body subframe:
Individually designed according to the chassis manufacturer's guidelines
Tipper body hydraulic system:
Complete HYVA hydraulics with cab controls
Material in standard specification:
  • Floor: HB450 — 4 mm
  • Sidewalls: STEEL ST 52.3 — 3 mm
  • Front bulkhead: STEEL ST 52.3 — 3 mm
  • Tailgate: STEEL ST 52.3 — 3 mm
Side walls in standard specification:
  • Right side (in the direction of travel): PENDEL/PALETA
  • Left side (in the direction of travel): PENDEL/PALETA
Tailgate in standard specification:
PENDEL

Standard equipment

  • Spare wheel on the front bulkhead (mechanical/retractable)
  • Plastic tool box
  • Rear mudguardsfull plastic+ mudflaps
  • Aluminium side underrun guards
  • Position light wiring
  • Wheel chock holders + shovel holder
  • Tipping limit switch + safety rope
  • Rubber stops — replaceable + rear light protection
  • Dual-circuit trailer connection
  • Reflective marking of the body according to ECE R104
  • Body prop + tipping warning signal
  • Mounting of the body at the VS-MONT plant + vehicle registration documents

Material used on the body selection

We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.

Side wall design selection

Click an option with a photo to see an example.

Right side (in the direction of travel)

Left side (in the direction of travel)

Tailgate design selection

Body paint colour colour chart

Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.

Tarpaulin system selection

Click an option with a photo to see an example.

Tarpaulin colour colour chart

Optional body equipment

Click an option with a photo to see an example.

Standard specification and standard equipment

m³Model range: 6 - 22 m³
Tipper body subframe:
Individually designed according to the chassis manufacturer's guidelines
Tipper body hydraulic system:
Complete HYVA hydraulics with cab controls
Material in standard specification:
  • Floor: HB450 — 4 mm
  • Sidewalls: Strenx S700 MC — 4 mm
  • Front bulkhead: Strenx S700 MC — 4 mm
  • Tailgate: Strenx S700 MC — 4 mm
Side walls in standard specification:
  • Right side (in the direction of travel): PENDEL/PALETA
  • Left side (in the direction of travel): PENDEL/PALETA
Tailgate in standard specification:
PENDEL

Standard equipment

  • Spare wheel on the front bulkhead (mechanical/retractable)
  • Plastic tool box
  • Rear mudguardsaluminium, mounted on the subframe+ mudflaps
  • Aluminium side underrun guards
  • Position light wiring
  • Wheel chock holders + shovel holder
  • Tipping limit switch + safety rope
  • Rubber stops — replaceable + rear light protection
  • Dual-circuit trailer connection
  • Reflective marking of the body according to ECE R104
  • Body prop + tipping warning signal
  • Rear discharge lip — fixed, flush with the floor (for asphalt pavers)
  • Mounting of the body at the VS-MONT plant + vehicle registration documents

Material used on the body selection

We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.

Side wall design selection

Click an option with a photo to see an example.

Right side (in the direction of travel)

Left side (in the direction of travel)

Tailgate design selection

Body paint colour colour chart

Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.

Tarpaulin system selection

Click an option with a photo to see an example.

Tarpaulin colour colour chart

Optional body equipment

Click an option with a photo to see an example.

Standard specification and standard equipment

m³Model range: 6 - 22 m³
Tipper body subframe:
Individually designed according to the chassis manufacturer's guidelines
Tipper body hydraulic system:
Complete HYVA hydraulics with cab controls
Material in standard specification:
  • Floor: HB450 — 4 mm
  • Sidewalls: Strenx S700 MC — 4 mm
  • Front bulkhead: Strenx S700 MC — 4 mm
  • Tailgate: Strenx S700 MC — 4 mm
Side walls in standard specification:
  • Right side (in the direction of travel): PENDEL/PALETA
  • Left side (in the direction of travel): PENDEL/PALETA
Tailgate in standard specification:
PENDEL

Standard equipment

  • Spare wheel on the front bulkhead (mechanical/retractable)
  • Plastic tool box
  • Rear mudguardsaluminium, mounted on the subframe+ mudflaps
  • Aluminium side underrun guards
  • Position light wiring
  • Wheel chock holders + shovel holder
  • Tipping limit switch + safety rope
  • Rubber stops — replaceable + rear light protection
  • Dual-circuit trailer connection
  • Reflective marking of the body according to ECE R104
  • Body prop + tipping warning signal
  • Rear discharge lip — fixed, flush with the floor (for asphalt pavers)
  • Mounting of the body at the VS-MONT plant + vehicle registration documents

Material used on the body selection

We recommend choosing the materials listed in the technical sheets — they are verified for the given load and application.

Side wall design selection

Click an option with a photo to see an example.

Right side (in the direction of travel)

Left side (in the direction of travel)

Tailgate design selection

Body paint colour colour chart

Before painting, the frame and all steel parts are blasted with steel grit, then coated with an anti-corrosion primer and a polyurethane top coat in the colour of the customer's choice.

Tarpaulin system selection

Click an option with a photo to see an example.

Tarpaulin colour colour chart

Optional body equipment

Click an option with a photo to see an example.

Customer required

Note

Attachments optional

Photos of the chassis, the vehicle registration certificate or a drawing will help us prepare a more accurate quote. Photos and PDF — max. 10 files, each up to 5 MB.

Are you interested in the S2 model?

Contact us for a no-obligation quote and technical advice

Write to us +421 918 902 999 NFC Vehicle NFC