Stetter Light Line truck mixers represent a premium lightweight solution with an emphasis on maximum payload, low weight and efficient operation. The lightweight construction of the body allows more concrete to be transported in one trip and at the same time contributes to lower fuel consumption.
Version shown: 4 axles · photo surroundings edited with AI.
Stetter Light Line truck mixers represent a premium lightweight solution with an emphasis on maximum payload, low weight and efficient operation. The lightweight construction of the body allows more concrete to be transported in one trip and at the same time contributes to lower fuel consumption.
However, the low weight does not come at the expense of durability. The patented mixing spirals and the innovative drum are made of highly wear-resistant steels, which ensure high resistance even during daily intensive use. The drum walls use high wear-resistant steel with a hardness of approximately 300 HB, while the mixing spirals and guards are made of steel with a hardness of approximately 500 HB. The use of these materials significantly increases the wear resistance of key components and contributes to their long service life.
The result is a combination of low dead weight, high payload and long service life, which makes the Light Line an efficient solution for everyday concrete transport.
More concrete per run means more efficient use of the vehicle, fewer trips and savings in operating costs.
LIGHT LINE — exceptionally low body weight thanks to innovative drum geometry and optimised mixing spirals. Drum walls use highly abrasion-resistant steel (approx. 300 HB); mixing spirals and wear protection use steel of approx. 500 HB.
| Parameter | AM7C | AM8C | AM9C | AM10C |
|---|---|---|---|---|
| Nominal volume (m³) | 7 | 8 | 9 | 10 |
| Geometric volume (l) | 12 710 | 14 120 | 15 810 | 17 040 |
| Volume after the waterline (l) | 8 150 | 9 340 | 10 390 | 11 400 |
| Degree of fulfillment (%) | 55,1 | 56,7 | 56,9 | 58,7 |
| Drum inclination (°) | 12,45 | 12,45 | 11,2 | 11,2 |
| Drum speed (rpm) | 0–12/14 | 0–12/14 | 0–12/14 | 0–12/14 |
| Body weight FH (kg) | 3 200 | 3 370 | 3 470 | 3 550 |
| A — Drum diameter (mm) | 2 300 | 2 300 | 2 300 | 2 300 |
| B — Hopper height (mm) | 2 425 | 2 499 | 2 474 | 2 532 |
| C — Driving height (mm) | 2 426 | 2 503 | 2 534 | 2 592 |
| D — Dumping height (mm) | 1 027 | 1 101 | 1 089 | 1 147 |
FH = drive from the chassis engine. Weights exclude the subframe and comply with DIN 70020, tolerance ±5%. The lightweight range allows up to 8 m³ of concrete to be transported without exceeding weight limits.
The lightweight construction of the body allows more concrete to be transported in one run.
The low dead weight of the body contributes to lower fuel consumption.
The patented mixing spirals and the innovative drum are made of highly wear-resistant steel.
Drum walls made of steel with a hardness of approximately 300 HB, mixing spirals and protective elements of approximately 500 HB.
The materials used significantly increase the wear resistance of key components.
Fewer trips and more efficient use of the vehicle bring savings in operating costs.
We install Stetter Light Line mixers on all common brands of trucks
Installations of Stetter LIGHT LINE auto mixers
Truck mixer · 4-axle
Truck mixer · 4-axle
Truck mixer · 4-axle
Truck mixer · 4-axle
Truck mixer · 4-axle
Truck mixer · 4-axle
Truck mixer · 5-axle
Truck mixer · 5-axle
Truck mixer · 5-axle
Truck mixer · 4-axleOptional accessories for Stetter mixers
Rear barrier
Full drum closure with hydraulic control
Extension channel
Non-return valve to the trough (manual control)
Rear aluminum mudguardsFill in the basic data and we will prepare a quotation for you. We'll get back to you within 24 hours.
Contact us for a non-binding calculation and technical advice
